*Patent Pending

By Firelite Forms Molds & Display Stands

(Arrow points to hole
for wire insertion)
Insert wire enclosed. Leave 1/2"
with loop on the inside of mold
Bend the outside wire flush against the mold and attach with a small piece of scotch tape. The tape will burn off in the kiln. Make sure the loop hole is as show.
Fill center cavity with color. Do Not over fill.
Carefully filll frit firmly under the wire and fill the rest of the mold
Fill mold with a slight mound in the center
After firing, lift and remove glass piece
The wire gives you many options. You can add anything to wire to enhance glass like beads, or loop it for a chain.

Copyright © 2005
SZQ  Designs